• Monitoring and archiving of ComAp controllers’ parameters and values
• View of actual/historic trends in the controller
• On-line change of controller’s parameters for easy regulator setup
• Supports connection to all Inteli-line controllers
• Enables parameter setting of ECON and INCON controllers
• Enables parameter setting of EMCON5 controller
• The software is a part of Installation Packages of ComAp gen-set and engine controllers

• Easy Plug & Play solution
• Simply connected using AirGate technology
• System works using WebSupervisor with all of its benefits
• Fleet remote monitoring and control
• Alarm monitoring
• On-line notification on alarms
• System offers large number of monitored units (100-1000+)
• Server – client based solution
• User-friendly graphical interface
• Accessible from any PC with Internet connection
• Data is periodically updated from machines to database server
• Automatic generation of reports – User defined XLSx files
• Access from any web enabled device such as PC/netbook, tablet, smartphone, etc.
• E-mail notification
• Available in various languages (English, French, German, Chinese, Spanish, Portuguese, Russian, Italian, Polish, Czech)

• nteliSys NTC Hybrid is a controller for applications that combine reciprocating gen-sets with renewable source of power. It continuously monitors data from all sources of energy including solar, wind or hydro and gen-sets.
  Should the energy production from the source of renewable energy drop below a certain threshold, the system automatically starts a backup diesel generator to ensure the continuation of power. The ComAp controller automatically starts synchronizes and loads the gen-sets to run smoothly alongside the renewable source.
  When the energy production from the renewable source becomes viable again, the system automatically cycles down the conventional generator.
• Dynamic Spinning reserve function allows changing the amount of gen-sets running according to the amount of power produced by renewables to ensure that the system can cover the drop in the renewable generator output. The controller can either receive the value from 3rd party device or it can calculate it in the built-in PLC.
• InteliSys NTC Hybrid can manage the outputs from gen-sets of different sizes, power outputs and different manufacturers, in such case the Fuel Save mode will automatically choose the most efficient combination of gen-sets based on their size to save some extra fuel.
• InteliSys NTC Hybrid provides interface to frequency inverters. In case that gen-set runs under certain percentage of its nominal load the controller regulates the inverter output to prevent the engine from running under-loaded.

• Mains monitoring (1 or 3 phases) for under and over voltage, under and over frequency and voltage unbalance
• Remote generating set start
• Change over for mains and generator contactors
• True voltage and current RMS measurement
• Test Run scheduler
• 3 phase power measurement
• Detailed RTC event and performance log
• WebSupervisor, AirGate and LOCATE support*
• 2 languages (user changeable)
• 7 binary inputs
• 7 binary outputs

* Plug-in module required

• Engine controller for land-based applications powered by engine driven compressors and pumps
• Control, monitoring and protection for both mechanical and electronic diesel/gas engines as well as peripheral equipment in one unit
• Support of engines with EFI (ECU) – CAN/J1939 or Cummins Modbus
• Event driven History record
• Speed control
• Engine measurement from sensors or via J1939
• 14 binary inputs, 14 binary outputs, 8 analog inputs
• Over 100 binary inputs and outputs is available via additional modules
• 3 level password protection
• Remote control and monitoring via analog/GSM modem, SMS or Internet
• Configurable PLC functions (Logical, Mathematical, Comparators, Analog switch, PID loops, Counters, Timers, Delay and others)
• Load sharing for propulsion engines
• Integrated clutch control
• Running hours meter, number of starts counter
• RS232, Modem, Modbus, Internet communication
• Push buttons for simple control, lamp test
• Front panel sealed to IP65
• EN, UL, CSA, NFPA certifications

• Modular engine controller designed for diesel driven fire pump applications based on the NFPA 20 standard
• Automatic and manual starting sequence based on two batteries according to NFPA 20 standard
• Support of engines equipped with Electronic Control Unit (ECU) – J1939 or Cummins Modbus interface
• Analog gauge (VDO, Datcon) outputs – operator friendly
• Engine speed control
• 3 configurable analog inputs + 2 analog inputs of battery voltage measurement
• 7 configurable binary inputs and outputs
• 6 LED indicators (Alarm, Warning, Not Ready, Running, Battery A, Battery B)
• Selectable protections alarm/shutdown
• 1 level of password protection
• USB, RS485/RS232/Modem/Modbus communication
• Automatic SMS on alarm
• On-line control and monitoring over web pages (embedded web server) via IB-Lite
• 2 languages (user changeable)
• Real time clock and event history log
• Push buttons for simple control, lamp test
• Front panel sealed to IP65
• Based on the NFPA20 standards
• EN certification
• Comparator with hysteresis regulation

• Engine controller for land-based and marine Tier4 applications
• Control, monitoring and protection for both mechanical and electronic diesel/gas engines in one unit
• Automatic or manual start/stop of the engine
• Programmable On/Off panel button
• Support of engines with Electronic Control Unit (ECU) – J1939 or Cummins Modbus
• Analog gauge (VDO, Datcon and others) outputs – operator friendly
• Smooth engine speed control
• 7 configurable binary inputs
• 7 configurable binary outputs
• 7 configurable analog inputs (3 resistive, 4 voltage) + 2 not configurable voltage inputs
• Selectable protections alarm/shutdown
• 3 level of password protection
• USB, RS485/RS232/Modem/Modbus communication
• Automatic SMS on alarm
• On-line control and monitoring over web pages (embedded web server) via IB-Lite
• Optional GSM/GPRS modem/wireless Internet via IL-NT GPRS
• Air Gate support
• 2 languages (user changeable)
• Real time clock and event history log
• PLC functions: PID loop, Comparators, Timers
• Push buttons for simple control, lamp test
• Front panel sealed to IP65
• EN, UL certifications

• Comprehensive gen-set controller for both single and multiple gensets operating in standby or paralleling modes
• To be used in conjunction with detachable colour displaysInteliVision 5 or InteliVision 8
• Support of engines with ECU (Electronic Control Unit)
• Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed
• Many communication options – easy remote supervising and servicing
• Gen-set performance log for easy problem tracing
• Automatic synchronizing and power control (via speed governor or ECU)
• AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)
• Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr
• Mains measurement: U, I, Hz, kW, kVAr, PF
• Inputs and outputs configurable for various customer needs
• Bipolar binary outputs – possibility to use BO as High or Low side switch
• RS232 interface with Modbus support; Analog / GSM / ISDN / CDMA modem support; SMS messages; ECU Modbus interface
• Controller redundancy
• Event-based history (up to 1000 records) with customer-selectable list of stored values; RTC; statistic values
• Integrated PLC programmable functions
• Integrated fixed and configurable protections
• DIN-Rail mount
• Customized firmware solution

• Gen-set controller for single or multiple generating sets operating in standby or parallel modes
• Support of engines with ECU (Electronic Control Unit)
• Many communication options – easy remote supervising and servicing
• Gen-set performance log for easy problem tracing
• Automatic synchronizing and power control (via speed governor or ECU)
• AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)
• Generator measurement, Mains measurement
• Inputs and outputs configurable for various customer needs
• Controller redundancy
• Event-based history (up to 500 records) with customer-selectable list of stored values; RTC; statistic values
• Integrated PLC programmable functions
• Integrated fixed and configurable protections

• Compact genset controller for gensets operating in multiple island and/or parallel to mains mode (together with MainsCompact NT
• Built-in automatic load dependent start/stop system (power management)
• Active Load and VAr sharing
• Running Hours equalization
• Full gen-set monitoring and protection
• Possibility to connect up to 8 gauges to display engine values
• True voltage and current RMS measurement
• Outstanding EFI engine support (CAN/J1939, RS232/Modbus) with diagnostic messages in plain text
• 3 phase generator voltage and current measurement
• 3 phase busbar voltage measurement
• 3 phase power measurement
• 3 analog inputs
• RS232, RS485, USB, Modbus, GSM/Analog Modem, Internet communication
• GPRS communication and IC-NT RD (remote display) software
• Air Gate and support
• Support of active SMS Events or Commands
• Event and performance log
• 2 languages (user changeable)