MD11 Exhaust Gas Thermocouple

The MD11 series is a standard exhaust gas temperature sensor EGT for medium and high speed engines, designed to be used without a pocket and is specifically fitted with thick insultation materials for operating in and around the engine exhaust pipe. The MD11 can be connected directly to a CMR pyrometric pipe harness and performs temperature measurement through a “K” type thermocouple for high reliability, universal readout and easy connection.

MD2 Exhaust Gas Thermocouple

The MD2 thermocouple standard exhaust gas temperature sensor EGT is designed for medium and high speed engines to be used without a pocket. Direct connection to a CMR thermometric pipe harness is recommended.

MD1 Exhaust Gas Thermocouple

The MD1 thermocouple standard exhaust gas temperature sensor EGT can be connected directly to a CMR pipe harness. The measuring element is a K type thermocouple for reliability, universal readout and easy connectivity, where a longer response time is not required.

Cylinder Liner T°

The MTCH cylinder liner temperature sensor is specifically designed for measuring cylinder liner wall temperatures of industrial engines. This allows advanced warning in case of piston seizure, piston ring breakage and underperformance due to defective cooling.

Combustion Chamber T°

The MTC stainless steel temperature sensor is specifically designed for measuring temperature inside the combustion chamber of gas engines and the compression chamber of gas compressors. Due to a short reponse time, cycle times can be analysed.

Charge Air T°

The MBT1 sensor series is specifically designed and manufactured for temperature measurement of fluids and charge air circulation associated with ndustrial lube oil, diesel oil, heavy fuel oil, supply gas, raw water, treated water, compressed air and super charged air.


The CVB ‘anti-knocking’ sensor is specifically designed for improving gas engine performance. It provides the engine ECU with vibration signals when normal values are exceeded due to knocking, allowing the ECU to tune ignition timing and subsequent cylinder load. – See more at:

Ambient T°


AMB temperature sensors are particularly recommended for use in “refrigerated atmospheres such as cargo holds, containers, warehouses and cold rooms.

Key parameters include:
• Possibility for 360° orientation of the sensor head for access to the cable glands
• Choice of sensing elements: thermocouple (all types) or resistant probe (simplex or duplex)
• Standard, nuclear or explosive atmosphere versions are available
• Fitted on set square or bulkhead
• Optionally, a 4-20 mA head transmitter can be integrated
• The electrical connection can be made by simple cable gland or qualified connector

ACS580 – general purpose drive

Commission effortless energy efficiency across a broad range of your variable speed applications

A new generation, all-compatible, wall-mounted and cabinet-built drive simplifies your processes and motor control with effortless efficiency. Allowing you to control a wide range of applications in different industries, with straightforward set up or commissioning. Most essential features are built-in as standard, simplifying drive selection, and making additional hardware unnecessary. As part of ABB’s all-compatible drives portfolio, the drive is designed to offer not only a technically compatible drive, but an all-compatible solution for your people, process, business and environmental goals you may have. The ACS580 is plug-in ready to control your pumps, fans, conveyors, mixers and many other variable and constant torque applications.

  • Easy to select, install and use
  • All essential features built into the drive
  • Straightforward settings menu and assistants for fast commissioning
  • Energy efficiency features for optimal energy use
  • Connect to any automation system or use stand-alone
  • Member of ABB’s all-compatible drives portfolio
  • Wide availability and support

ACS550 – general purpose drive

When you need simplicity and intelligence in one self-contained solution the ACS550 covers a wide range of options. Ideal for variable and constant torque applications from pumps and fans to conveyors and mixers as well as many other variable and constant torque applications. Enjoy plug and play convenience right from the start. No customizing or special product engineering required.  Monitor your savings easily with the built-in counters, which display energy savings in kilowatt hours, carbon dioxide emissions or local currencies.


  • 0.75 to 355 kW/1 to 500 Hp
  • Vector control
  • Built-in EMC filter and Modbus fieldbus interface
  • Swinging choke for superior harmonic reduction
  • Coated boards for harsh environments